Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Nov 1, 2021
- #1
1st Off after having several Heckler & Koch handguns I have a pretty good idea of what most of them are worth
Today while visiting my favorite gun getting place I see a Hk P2000 & asked to see it
It was an AG P2000 in 357 SIG marked $650 with one magazine, no box & a kydex fobus holster, Nothing Else.
Serial # was 124-00067*
The control levers on both sides had turned Plum in Color too, But where tight
Pistol had some wear on the barrel but nothing out of the ordinary
The manager I went to high school with & said they could do better.. Hmmm??
I'm Guessing $600 which is what both my USP Compact 40s Cost Me
Also the ten magazines I have for the pair of USP Compact 40 would also function in the P2000 357 SIG
Plus my USPc Holsters would also work too!
So what do you think out there @ The HKProShop?? Should this be my Next HK?
Tried some searching & came up with nothing except some closed auctions for P2000SK's in 357 SIG
I'm Guessing these aren't made any Longer
It had the smaller backstrap which would be my preference anyhow but a pair of both sizes are available for $50
HK12Step
Well-known member
Feedback: 0/0/0
- Joined
- Jan 5, 2021
- Posts
- 233
- Nov 1, 2021
- #2
Absolutely Gary. No brainer for me. I haven’t seen a P2000 .357SIG go for les than $1k in some time. You’ve already had the USPc (never should have sold it ) in that caliber so you know how it shoots. You don’t see these pop up everyday. You can pick up a case/manual off of EBay/GB if you want one and the backstraps can be had for around $8 each without the lockout, double that if you want the lockout. (The P2000 comes with 4: S,M,L&XL)You can also replace the control levers for about $25 each if you don’t like the plum. If it’s available for $600 or even the $650…..you march back down there and snatch it up. It took me a couple years to find mine, love it. I’d say it’s your lucky day. Let us know how it turns out, and when you buy it, throw that Fobus holster in the trash. I guess if it is the variant you prefer also plays a role, is it a V3 or V2?
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 1, 2021
- #3
What's the difference in V2 vs V3??
It had the deco*cker at the rear of the slide & No Control Levers
To Me a V2 is a LH USPc
Inform me..
HK12Step
Well-known member
Feedback: 0/0/0
- Joined
- Jan 5, 2021
- Posts
- 233
- Nov 1, 2021
- #4
That’s a V3, DA/SA w/rear deco*cker. V2 is the LEM (heavy) V1 LEM (light). HK chose not to follow the USP variants numbering for the P series for some reason.
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 1, 2021
- #5
Thanks!
I never knew any of that about the P2000s
HKs are a learning experience every time..
If I had to choose it would be the SA/DA = V3 SO!!
What Really SUCKS is I am currently all but broke BUT I Get paid Wednesday & Can put it on Lay-A-Way for 10% down
It would make a GR8 Christmas Gift for the Thrifty HK Guy = ME!!
Hope no one else sees it before Wednesday Morning, It's sitting with a bunch of Glocks & S&W M&Ps 10 feet from the customers where you can barely see, I asked " Is That an Hk P2000?? " She says Yes it Just came out.. Looks like a Glock from far away
Had my glasses on or I wouldn't have even seen it + I didn't even grab my wallet when We left, So I had my Son give his ID to see it & then being I know the Manager I just asked to get the serial # & Date Code = AG #124- & Then She said it stays co*cked & being it had a trigger lock on it wouldn't deco*ck so she removed the lock & handed it over to me anyhow, I just pressed the deco*cking lever & the hammer fell as it should, The barrel's end had the moon markings fairly well as it should being USED & one 12 round 357 magazine & the two slide release levers where Plum, Reminded me of the P7M8's slide I used to have with the Mill Mark.. And Yeah a Fobus Holster, I have 4-5 leather holsters for the P2000/USPc.. I'm going to sell some stuff & the polymer HK holsters are one of those eBay things, I also found a Sterling P7M8/P7M13 manual & green book of how to take them apart = Pre Internet Stuff..
I have a Doctors appointment @ 9:00am tomorrow morning, Might have to stop there afterwards to try an save the P2000
Hope it Doesn't Get Away From Me!!
Gary the Thrifty Hk Guy! Pew Pew HaHa!!
Last edited:
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 2, 2021
- #6
And Now a Question that I should have asked, Will a USP Compact 40 S&W Barrel fit in the 357 SIG P2000
I know it's longer but not by much
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 2, 2021
- #7
IT GOT AWAY!!
HK P2000 357 SIG 124-000675
$650 Item # 302266994
GONE!!
HK12Step
Well-known member
Feedback: 0/0/0
- Joined
- Jan 5, 2021
- Posts
- 233
- Nov 2, 2021
- #8
Ugh, tough break and a missed opportunity especially at that price. Oh well, wasn’t meant to be I guess.
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 2, 2021
- #9
They still showed it @ 11:30 this Morning & I took a nap after lunch & at 2:00 it was gone..
It's all on Me.. It could have been, but I only slept two hours last night..
To the new buyer who will be along, There is a Case, manual & three back straps on eBay for $65
HK P2000 OEM Factory Plastic Case with (3) Pistol Grips and Owner's Manual
Guyanaman1963
Well-known member
Feedback: 1/0/0
- Joined
- Nov 19, 2020
- Posts
- 2,418
- Location
- Clermont, Florida
- Nov 2, 2021
- #10
Sorry to hear that Gary!
Hopefully another one will come along soon.
M.
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 2, 2021
- #11
Thanks Mo
BTW My Son offered to buy Me that gun yesterday, BUT I didn't want him spending his money on it..
Then there would be the ammo shortage + it being 357 SIG
Last edited:
Guyanaman1963
Well-known member
Feedback: 1/0/0
- Joined
- Nov 19, 2020
- Posts
- 2,418
- Location
- Clermont, Florida
- Nov 2, 2021
- #12
Hk-USPC-40 said:
Thanks Mo
BTW My Son offered to buy Me that gun yesterday BUT I didn't want him wasting his money on it..
My Doctors appointment went just like I had feared..
I'm On The Way Out!!
My Beard has turned White & Feel like dump all the time
My Heart is Ruined
2nd appointment next Tuesday @ 9:00am with the BAD NEWSThis is almost as bad as when my Twin Brother Jerry Passed Away.. ALMOST..
Need to go see my Vietnam Veteran Buddy Steve at the Nursing Home
He gave me his keys & wallet & told me to take all his money??
He was in the VA Hospital for 3-4 months & now is in a Home a few miles from my house
Gary, hang in there brother… I am here for you!
i hope you get good news on Tuesday.
Just remember….. you have friends here!
M.
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 2, 2021
- #13
I Know Brother But sure seems like it's all down hill from here.
Shouldn't have posted that stuff here either.
I'll Cut it Out
Gary
AGG
Staff member
Feedback: 8/0/0
- Joined
- Nov 11, 2020
- Posts
- 6,679
- Location
- Alabama
- Nov 3, 2021
- #14
Hk-USPC-40 said:
I Know Brother But sure seems like it's all down hill from here.
Shouldn't have posted that stuff here either.
I'll Cut it Out
Gary
Keep the faith--- post what you want--- do you think that this is HKP
?
Tony
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 3, 2021
- #15
Need to come up with a Logo & Have some Hats & T-Shirts Made for HkProShop
Maybe the S should be a german SS or KISS S?? Hmmm??
I found a Gray case for the Early USPc & have it and a manual coming plus a Galco Leather Paddle holster
Paid Too Much for the case BUT??
I'll start a thread about it in the USP Section
Gary
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 16, 2021
- #16
Here's a Link to Gunbroker = Hk P2000 357 SIG with 40 S&W Barrel & four 12 round magazines
Auction is up too $605 currently, How high will it go..
Heckler & Koch HK P2000 V3 357 Sig / 40 S&W - 2 Barrels & 4 Mags
I won't be bidding as the house taxes are due + Christmas & Thanksgiving
Gonna Guess $1000 being the pistol is worth $800, The extra Barrel $200 & two extra magazines = $60
Here's the HkProShop Logo I came up with
Gary
I'm Guessing a $200 357 SIG Barrel for my USP Compacts will scratch the Itch FOR NOW
Had the EKG Today but no results for till December 7th or 9th
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 19, 2021
- #17
Been watching the live auction of the 357 SIG P2000 on Gunbroker
@ 9:00pm it was $1580.56 The with 30 seconds left it sprang to $1836.11 for the WIN!!
That's $1200 more than I could have bought one for
Kicking Myself for not jumping on the one I saw for $650
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 19, 2021
- #18
And to the Buyer of the P2000
Here's a Case & Manual with three backstraps to complete the package
HK P2000 OEM Factory Plastic Case with (3) Pistol Grips and Owner's Manual
$65 Buy It Now on eBay
Deputydave
Well-known member
Feedback: 0/0/0
- Joined
- Dec 19, 2020
- Posts
- 133
- Nov 23, 2021
- #19
Hk-USPC-40 said:
@ 9:00pm it was $1580.56 The with 30 seconds left it sprang to $1836.11 for the WIN!!
Someone must have really wanted that pistol to pay that much. More than twice what it's worth in my area.
Hk-USPC-40
Well-known member
Feedback: 1/0/0
- Joined
- Dec 15, 2020
- Posts
- 759
- Location
- Hk USPc40 V1 AI
- Thread Starter Thread Starter
- Nov 23, 2021
- #20
It's a $650 Handgun in an odd caliber that's why it sold for $1836.11
USPc357 sold last night for $1700
https://www.gunbroker.com/item/909052069
I bought one of these for $350 20 years ago
You must log in or register to reply here.